(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

7 Million Products, 2,000 Brands.
50,000 Stock items for Same Day Ship Out.

Tel: (60) 3 7890 6399

9am – 6pm (Mon – Fri), 9am – 1pm (Sat)

All Categories

Search by Application

inCAD Library

Brands

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Please note that E-Invoice will be sent to our customers by email. For more information, please read News.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, T-Shaped Hole

MISUMI_Test

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMTACT6-Q[1,5]-R[1,5]-S[1,5]-G[1,5]-K[1,5]
BMTACT6-Q[1,5]-R[1,5]-S[1,5]-G[1,5]-KM[3,4]
BMTACT6-Q[1,5]-R[1,5]-S[1,5]-GM[3,4]-K[1,5]
BMTACT6-Q[1,5]-R[1,5]-S[1,5]-GM[3,4]-KM[3,4]
BMTACT6-Q[1,5]-R[1,5]-SM[3,4]-G[1,5]-K[1,5]
BMTACT6-Q[1,5]-R[1,5]-SM[3,4]-G[1,5]-KM[3,4]
BMTACT6-Q[1,5]-R[1,5]-SM[3,4]-GM[3,4]-K[1,5]
BMTACT6-Q[1,5]-R[1,5]-SM[3,4]-GM[3,4]-KM[3,4]
BMTACT6-Q[1,5]-RM[3,4]-S[1,5]-G[1,5]-K[1,5]
BMTACT6-Q[1,5]-RM[3,4]-S[1,5]-G[1,5]-KM[3,4]
BMTACT6-Q[1,5]-RM[3,4]-S[1,5]-GM[3,4]-K[1,5]
BMTACT6-Q[1,5]-RM[3,4]-S[1,5]-GM[3,4]-KM[3,4]
BMTACT6-Q[1,5]-RM[3,4]-SM[3,4]-G[1,5]-K[1,5]
BMTACT6-Q[1,5]-RM[3,4]-SM[3,4]-G[1,5]-KM[3,4]
BMTACT6-Q[1,5]-RM[3,4]-SM[3,4]-GM[3,4]-K[1,5]
BMTACT6-Q[1,5]-RM[3,4]-SM[3,4]-GM[3,4]-KM[3,4]
BMTACT6-QM[3,4]-R[1,5]-S[1,5]-G[1,5]-K[1,5]
BMTACT6-QM[3,4]-R[1,5]-S[1,5]-G[1,5]-KM[3,4]
BMTACT6-QM[3,4]-R[1,5]-S[1,5]-GM[3,4]-K[1,5]
BMTACT6-QM[3,4]-R[1,5]-S[1,5]-GM[3,4]-KM[3,4]
BMTACT6-QM[3,4]-R[1,5]-SM[3,4]-G[1,5]-K[1,5]
BMTACT6-QM[3,4]-R[1,5]-SM[3,4]-G[1,5]-KM[3,4]
BMTACT6-QM[3,4]-R[1,5]-SM[3,4]-GM[3,4]-K[1,5]
BMTACT6-QM[3,4]-R[1,5]-SM[3,4]-GM[3,4]-KM[3,4]
BMTACT6-QM[3,4]-RM[3,4]-S[1,5]-G[1,5]-K[1,5]
BMTACT6-QM[3,4]-RM[3,4]-S[1,5]-G[1,5]-KM[3,4]
BMTACT6-QM[3,4]-RM[3,4]-S[1,5]-GM[3,4]-K[1,5]
BMTACT6-QM[3,4]-RM[3,4]-S[1,5]-GM[3,4]-KM[3,4]
BMTACT6-QM[3,4]-RM[3,4]-SM[3,4]-G[1,5]-K[1,5]
BMTACT6-QM[3,4]-RM[3,4]-SM[3,4]-G[1,5]-KM[3,4]
BMTACT6-QM[3,4]-RM[3,4]-SM[3,4]-GM[3,4]-K[1,5]
BMTACT6-QM[3,4]-RM[3,4]-SM[3,4]-GM[3,4]-KM[3,4]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-[G1N,G2N]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-G[1,2,5]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-[S1N,S2N]-G[1,2,5]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-[G1N,G2N]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-G[1,2,5]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-[R1N,R2N]-S[1,2,5]-G[1,2,5]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-[G1N,G2N]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-G[1,2,5]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-[S1N,S2N]-G[1,2,5]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-[G1N,G2N]-K[1,2,5]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-G[1,2,5]-[K1N,K2N]
BMTAFA1-[Q1N,Q2N]-R[1,2,5]-S[1,2,5]-G[1,2,5]-K[1,2,5]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-[G1N,G2N]-K[1,2,5]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-G[1,2,5]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-[S1N,S2N]-G[1,2,5]-K[1,2,5]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-[G1N,G2N]-K[1,2,5]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-G[1,2,5]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-[R1N,R2N]-S[1,2,5]-G[1,2,5]-K[1,2,5]
BMTAFA1-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-[G1N,G2N]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-[G1N,G2N]-K[1,2,5]
BMTAFA1-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-G[1,2,5]-[K1N,K2N]
BMTAFA1-Q[1,2,5]-R[1,2,5]-[S1N,S2N]-G[1,2,5]-K[1,2,5]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Material	Surface Treatment	Block Size (mm)	Number of Circuits	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing R Part Thread Dia. NPT Selection [R]	Drawing S Part Thread Dia. NPT Selection [S]	Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)	Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)	Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)	Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)	Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)	Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	-	-	3 ～ 4	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	-	-	3 ～ 4	1 ～ 5	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	-	-	3 ～ 4	-	1 ～ 5	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	-	-	3 ～ 4	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	-	3 ～ 4	-	1 ～ 5	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	-	3 ～ 4	-	1 ～ 5	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	-	3 ～ 4	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	-	3 ～ 4	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	-	3 ～ 4	3 ～ 4	1 ～ 5	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	-	3 ～ 4	3 ～ 4	1 ～ 5	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	-	3 ～ 4	3 ～ 4	-	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	-	3 ～ 4	3 ～ 4	-	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	3 ～ 4	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	3 ～ 4	-	-	1 ～ 5	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	3 ～ 4	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	3 ～ 4	-	3 ～ 4	1 ～ 5	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	3 ～ 4	-	3 ～ 4	1 ～ 5	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	3 ～ 4	-	3 ～ 4	-	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	-	3 ～ 4	-	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	3 ～ 4	3 ～ 4	-	1 ～ 5	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	-	1 ～ 5	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	3 ～ 4	3 ～ 4	-	-	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	1 ～ 5	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	1 ～ 5	-	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	-	3 ～ 4	3 ～ 4	3 ～ 4	-	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Not Provided	25 x 25	6	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	15	Fixed Type	Pneumatic	-	-	-	-	-	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	3 ～ 4	-	-	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	-	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	-	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	1/4 [Q2N] / 1/8 [Q1N]	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5	-	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	-	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	1 ～ 5	-	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	1/4 [Q2N] / 1/8 [Q1N]	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	-	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	-	1/4 [R2N] / 1/8 [R1N]	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	-	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	-	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	-	1/4 [R2N] / 1/8 [R1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	-	1 ～ 5
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	1/4 [K2N] / 1/8 [K1N]	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	1/4 [G2N] / 1/8 [G1N]	-	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	1/4 [K2N] / 1/8 [K1N]	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	-	1 ～ 5	1 ～ 5	-
-	1 Piece(s)	4 Day(s)	-	Aluminum Alloy	Clear Anodize	30 x 40	1	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	30	Fixed Type	Pneumatic	-	-	-	-	1/4 [S2N] / 1/8 [S1N]	-	-	-	-	-	1 ～ 5	1 ～ 5	1 ～ 5	1 ～ 5	-

1
2
3
4
5
Next >>

Basic Information

Shape	Lateral Through Hole, T-Shaped Hole

Configure

3,439 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- SUS304
- Brass
- SS400
- Aluminum Alloy
- Steel for General Structure
Clear
Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
- Clear Anodize
Clear
Block Size(mm)
- 25 x 25
- 30 x 40
- 40 x 40
- 50 x 50
Clear
Number of Circuits
- 1
- 2
- 3
- 4
- 5
- 6
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, M (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
15

30

40
[25-50/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
- Pneumatic
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/2 [G4N]
- 1/4 [G2N]
- 1/8 [G1N]
- 3/8 [G3N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/2 [K4N]
- 1/4 [K2N]
- 1/8 [K1N]
- 3/8 [K3N]
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
- 3/8 [Q3N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
- 3/8 [R3N]
Clear
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
- 3/8 [S3N]
Clear
Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)
3

4
Clear
Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)
3

4
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5
Clear
Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1

2

3

4

5
Clear
type
- BMTAC
- BMTAF
- BMTAFA
- BMTAL
- BMTALA
- BMTFM
- BMTFMP
- BMTFR
- BMTFRP
- G-BMTAC
- G-BMTAF
- G-BMTAFA
- G-BMTAL
- G-BMTALA
- G-BMTF
- G-BMTFC
- G-BMTFM
- G-BMTFMP
- G-BMTFR
- G-BMTFRP
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

5 Day(s) or Less

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hydraulic Fittings/Long Straight/Female/PT Threaded/PF Threaded
MISUMI_Test Standard Price : MYR 55.54 Days to Ship : 2 Day(s) or more
Hydraulic Fittings/90 Deg. Elbow/PT Threaded/PF Tapped
MISUMI_Test Standard Price : MYR 27.07 Days to Ship : 1 Day(s)
Swivel Joints/Straight/90 Deg. Elbow/PT Threaded/PT/PF Tapped/Threaded
MISUMI_Test Standard Price : MYR 138.83- Days to Ship : 2 Day(s) or more
Tapered Screw Plugs
MISUMI_Test Standard Price : MYR 1.77- Days to Ship : 1 Day(s) or more
High Pressure Pipe Fittings/45 Deg. Elbow
MISUMI_Test Standard Price : MYR 23.54- Days to Ship : 2 Day(s) or more

Tech Support

: Technical Inquiry

Top of the page

Payment Method

Credit Card
Bank Transfer

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm

Tel: (60) 3 7890 6399

Inquiry

All Categories

Categories

Search by Application

Brands

Message from MISUMI

My Favorites

Settings

How can we improve?

Manifold Blocks - Hydraulic / Pneumatic - Lateral Through Hole, T-Shaped Hole

Part Number

Basic Information

Configure

Specification/Dimensions

Material

Surface Treatment

Block Size(mm)

Number of Circuits

Thread Size / Type

Mounting Hole Change

Pitch P(mm)

Pitch Standard / Configurable

Application

Drawing G Part Thread Dia. NPT Selection [G]

Drawing K Part Thread Dia. NPT Selection [K]

Drawing Q Part Thread Dia. NPT Selection [Q]

Drawing R Part Thread Dia. NPT Selection [R]

Drawing S Part Thread Dia. NPT Selection [S]

Select a value for M Thread (Coarse) Dia. on G (in Drawing). [GM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on K (in Drawing). [KM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on Q (in Drawing). [QM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on R (in Drawing). [RM] 3(M3) 4(M4)

Select a value for M Thread (Coarse) Dia. on S (in Drawing). [SM] 3(M3) 4(M4)

Select a value for PT/PF, M Thread (Coarse) Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

Select a value for PT/PF, M Thread (Coarse) Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

Select a value for PT/PF, M Thread (Coarse) Dia. on Q (in Drawing). [Q] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)

Select a value for PT/PF, M Thread (Coarse) Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)

Select a value for PT/PF, M Thread (Coarse) Dia. on S (in Drawing). [S] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm