(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Core Drills (Tip Tools)
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Unpacking Cutters
- Packing Support Equipment
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Aluminum Frame 8-100 Series/slot width 10/100x100mm
- Volume Discount
(i)Caution
- Items with L Length longer than 2,000.5mm will be treated as special delivery from 01/11/02019,
and additional cost RM119.30 will be added in each product for the delivery fee.
For items L Length shorter than 2,000mm will not have any price increase
Part Number
Configured Part Number is shown.
[ ! ]Cut surfaces and altered parts are not surface treated.
■8-45 Series
Aluminum Extrusions with 10mm Slot Width. Applicable to M8 Screws.
Specifications
| Part Number | - | L |
| NEFS8-100100 | - | 800 |
| KNEFS8-100100 | - | 4000 |
■Configurable Length Extrusion
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L 0.5mm Increment |
Mass kg/m |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | |||||||
| GNFS | A6063S-T6 | Clear Anodize | GNFS8-100100 | 50~4000 | 10.68 | 3957 | 465.8x104 | 465.8x104 |
| GFS | A6061SS-T6 Equivalent | Clear Anodize | GFS8-100100 | 50~4000 | 10.68 | 3957 | 465.8x104 | 465.8x104 |
| NEFS | A6063S-T5 | Clear Anodize | NEFS8-100100 | 50~4000 | 7.86 | 2922 | 376.0x104 | 376.0x104 |
[ ! ]For some product types, up to 6,000mm length is available.
[ ! ]Some extrusions are not applicable. For details, refer to "Information about Non-FA Catalog Standard Product Services" (P.131) and contact the relevant person in charge at MISUMI.
■Fixed Length Extrusion (Effective Length 4000mm)
[ ! ]Part numbers beginning with the character "K" indicate Fixed Length Extrusion.
| Type | [ M ]Material | [ S ]Surface Treatment | Part Number | L mm |
Sectional Area mm2 | Cross Sectional Moment of Inertia mm4 | |
| ℓx | ℓy | ||||||
| GNFS | A6063S-T6 | Clear Anodize | KGNFS8-100100 | 4000 | 3957 | 465.8x104 | 465.8x104 |
| GFS | A6061SS-T6 Equivalent | Clear Anodize | KGFS8-100100 | 4000 | 3957 | 465.8x104 | 465.8x104 |
| NEFS | A6N01SS-T5 | Clear Anodize | KNEFS8-100100 | 4000 | 2922 | 376.0x104 | 376.0x104 |
[ ! ]Effective length of 4000mm indicates extrusions with an effective length of 4000mm or more. The actual length including marginal grip is more than 4000mm (several dozen mm). Fixed Length Extrusions must be cut by users thus the exact length cannot be specified.
Alterations
By using MISUMI's Long Aluminum Frame specification from the following additions, the high structure reassembling is freely possible.
Depending on classifications and sizes, there are some inapplicable frames.
For more information, please read the inapplicable listed on each page description table.
Inside the page description table, the items with "-" mark indicates the inapplicable.
| Category | Alteration Names | Codes | Explanations | Catalog Page |
| Aluminum Frame Alteration Summary/Chamfer/Part# Labeling Service | P2-755&756 | |||
| End Tapping | End Tapping on Center Hole | LTP/RTP/TPW LHP/RHP/HPW | Add tappings on frame ends. | P2-757 |
| End Tapping 4 Corner Holes | LSP/RSP/SPW | P2-768 | ||
| Specify How to Cut | Precision Cut | SC | Change total length tolerance. (Ｌ±0.5→Ｌ±0.2) [ ! ]Available only for Ｌ≦1500 | P2-758 |
| 45 deg Cut | L_T45/R_T45 | Cut at 45 deg angle. | ||
| Wrench Access Holes | Wrench Access Hole at Fixed Position | LWP/RWP | Add wrench access holes at fixed position for blind joints. | P2-759&760 |
| Wrench Access Hole at Specified Position | AH/BH/AV/BV | Add wrench access holes at specified position for blind joints. | P2-761&762 | |
| Counterbores | Counterbores at Specified Position | Z6/XA100 | Add counterbores at specified position. Use the holes for connecting the frames and a table top. | P2-763 |
| Holes for Specific Blind Joint Type | D Hole | LDH/RDH | Add holes needed for Single Joint connection. | P2-764 |
| S Hole | LSH/RSH | Add holes needed for pre-assembly double joint connection. | P2-765 | |
| M Hole | LMH/RMH | Add holes needed for post-assembly double joint connection. | P2-766 | |
| L Hole | JLP/KLP | Add holes needed for parallel joint connection. | P2-767 | |
| Other Alterations | GNFS/GFS Series End Tapping | LTS/RTS/TSW | Add end tappings on high rigidity frames. | P2-768 |
| HFSR Series End Tapping | LTS/RTS/TSW | Add end tappings needed for adding a protection cover on the end fo HFSR series frame. | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| GFS8-100100-[50-4000/0.5] |
| KGFS8-100100-4000 |
| KGNFS8-100100-4000 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Extrusion Type_ | Material | L Dimension Fixed, Specified | Overall Length L (Effective Length) (mm) | Overall Length L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) or more | 10 | GFS (High Rigidity) | A6061SS-T6 Equivalent | Configurable | - | 50 ～ 4000 | ||
MYR 2,437.88 | 1 Piece(s) | Available | 2 Day(s) or more | 10 | GFS (High Rigidity) | A6061SS-T6 Equivalent | Stationary | 4000 | - | |
MYR 2,579.41 | 1 Piece(s) | Available | 2 Day(s) or more | - | GNFS (High Rigidity, Economy) | A6063S-T6 / A6063S-T6 Equivalent | Stationary | 4000 | - |
Loading...
Basic Information
| Standard Extrusion Size(mm) | 100 | Extrusion Size | 100x100 | Extrusion Series | 8-45 Series |
|---|---|---|---|---|---|
| Extrusion Type | Square Shape | Number of Extrusion Slots | 2 Slots x 2 Slots | Surface Treatment | Clear Anodize |
| Number of Slotted Surfaces | Four-Side Slots | Surface Milled | Not Provided | Extrusion Size: Width (A)(mm) | 100 |
| Extrusion Size: Thickness (T)(mm) | 100 |
Specification/Dimensions
-
Extrusion Type_
- GFS (High Rigidity)
- GNFS (High Rigidity, Economy)
-
Material
- A6061SS-T6 Equivalent
- A6063S-T6
- A6063S-T6 Equivalent
-
L Dimension Fixed, Specified
- Configurable
- Stationary
-
Overall Length L (Effective Length)(mm)
- 4000
-
Overall Length L(mm)
-
type
- GFS8-100100
- KGFS8-100100
- KGNFS8-100100
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 3 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Aluminum Frame 5 Series/slot width 6/20x60mm, Parallel Surfacing
- Aluminum Frame 6 Series/slot width 8/30x30mm
- Aluminum Frame 6 Series/slot width 8/30x60mm
- Aluminum Frame 6 Series/slot width 8/30x30mm, Parallel Surfacing
- Aluminum Frame 8 Series/slot width 10/45 Degree
- Aluminum Frame 8-90 Series/slot width 10/L-Shaped90x90x45mm
- Aluminum Frame 8-100 Series/slot width 10/100x200mm
- Basic Frame M4 Series Heavyweight Class AFS-2020-4
Complementary Products
-
Tabbed Reversal Brackets - For 8-45 Series (Slot Width 10mm) Aluminum Frames
MISUMI_Test Standard Price : MYR 4.70- Days to Ship : 1 Day(s) or more
-
Free Angle Brackets - For 8-45 Series (Slot Width 10mm) Aluminum Frames
MISUMI_Test Standard Price : MYR 23.44- Days to Ship : 2 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
Extruded Brackets - For 2 or More Slots - For 8-45 Series (Slot Width 10mm) Aluminum Frames (100 square)MISUMI_Test
Standard Price : MYR 21.19-
Days to Ship : 2 Day(s) or more
-
-
-
Brackets for Reinforcement for 8-45 Series Aluminum FramesMISUMI_Test
Days to Ship : 4 Day(s) or more
-
Aluminum Frame 6 Series/slot width 8/30x30mm, Parallel SurfacingMISUMI_Test
Days to Ship : 4 Day(s) or more
-
Tabbed Brackets / Extruded Brackets - For 2 or More Slots - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI_Test
Standard Price : MYR 66.75-
Days to Ship : 2 Day(s) or more
-
Frame End Caps For 8-45 Series (Slot Width 10mm) Aluminum Frames - Screw Mounted
MISUMI_Test
Standard Price : MYR 9.62-
Days to Ship : 1 Day(s) or more
-
-
Thick Brackets - For 2 or More Slots - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI_Test
Standard Price : MYR 14.12-
Days to Ship : 1 Day(s) or more
-
Tabbed Reversal Brackets - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI_Test
Standard Price : MYR 4.70-
Days to Ship : 1 Day(s) or more
-
-
Tabbed Reversal Brackets - For 2 or More Slots - For 8-45 Series (Slot Width 10mm) Aluminum FramesMISUMI_Test
Standard Price : MYR 50.61-
Days to Ship : 2 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy