(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Core Drills (Tip Tools)
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Unpacking Cutters
- Packing Support Equipment
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
Tube Fitting Different Diameter Union Straight for Standard Pipe
Many types of one-touch fittings for standard pipe.
[Features]
· One-touch fitting for general pneumatic pipes.
· Can change the take-off angle of the resin body after mounting.
· Various products available.
· Centralized piping is enabled.
Japanese Only
Part Number
Configured Part Number is shown.
One-Touch Fitting For General Pneumatic Piping
Plastic: PBT, Metal: Brass + Ni plating, Sealing rubber: NBR
Reduced ozone concentrations, non-grease/oil-free specification, clean room packaging specification, clean washing specification
Extension Screw Adapter appearance
Extension Screw Adapter dimensional drawing (metric thread type)
| Format | Tube Outer Diameter φD1 | Tube Outer Diameter φD2 | B | φP1 | φP2 | Tube End C1 | Tube End C2 | Effective Cross-Sectional Area (mm2) | Mass (g) |
|---|---|---|---|---|---|---|---|---|---|
| PG6-4 | 6 | 4 | 34.4 | 12.5 | 12.5 | 17 | 14.9 | 5.3 | 6.4 |
| PG8-4 | 8 | 4 | 36.6 | 14.5 | 10.7 | 18.1 | 14.9 | 4 | 7.2 |
| PG8-6 | 6 | 37.9 | 14.5 | 17 | 12.5 | 8.8 | |||
| PG10-6 | 10 | 6 | 39.8 | 17.5 | 13 | 20.2 | 17 | 10.5 | 12 |
| PG10-8 | 8 | 43.1 | 17.5 | 18.4 | 20 | 14 | |||
| PG12-8 | 12 | 8 | 44 | 21 | 14.5 | 23.4 | 18.1 | 21.5 | 16 |
| PG12-10 | 10 | 47.6 | 21 | 20.2 | 35 | 21 | |||
| PG12-3/8 | 3/8 | ||||||||
| PG16-12 | 16 | 12 | 49.5 | 25 | 25 | 24.1 | 23.4 | 88.6 | 27 |
| PG1/4-4 | 1/4 | 4 | 34.4 | 12.5 | 12.5 | 17 | 14.9 | 5.3 | 6.3 |
| PG5/16-3/16 | 5/16 | 3/16 | 38.3 | 14.5 | 145 | 18.1 | 17.4 | 5 | 8.8 |
| PG5/16-1/4 | 1/4 | 37.9 | 17 | 12.5 | 8.7 | ||||
| PG3/8-5/16 | 3/8 | 5/16 | 43.1 | 17.5 | 17.5 | 20.2 | 18.4 | 20 | 15 |
| PG1/2-1/4 | 1/2 | 1/4 | 44.4 | 21 | 14.5 | 23.7 | 17 | 11.5 | 15 |
| PG1/2-5/16 | 5/16 | 44.3 | 18.1 | 23 | 16 | ||||
| PG1/2-3/8 | 3/8 | 47.9 | 21 | 20.2 | 50.8 | 21 | |||
| PG5/8-1/2 | 5/8 | 1/2 | 49.8 | 25 | 25 | 24.1 | 23.7 | 90.6 | 26 |
Unit: mm
| Usable Fluids | Air, water (see conditions*) |
|---|---|
| Maximum Operating Pressure | 1.0 MPa |
| Operating Vacuum Pressure | -100 kPa |
| Operating Temperature Range | 0 to 60°C (no freezing) |
Specifications
- *When the fluid used is water, the following conditions must be observed.
- 1.When using water, make sure the surge pressure stays below the maximum operating pressure.
- 2.Tap water of the standard equivalent to the water supply in Japan can be used. Please inquire if you want to use other kinds of water.
- 3.Be sure to use an insert ring when using water.
| Millimeter Size (mm) | φ4, φ6, φ8, φ10, φ12, φ16 |
|---|---|
| Inch Size | φ1/8, φ5/32, φ3/16, φ1/4, φ5/16, φ3/8, φ1/2, φ5/8 |
Compatible sizes (tube sizes)
| Metric Male Thread | M5 × 0.8, M6 × 1 |
|---|---|
| Taper Pipe Male Thread | R1/8, R1/4, R3/8, R1/2 |
| Metric Female Thread | M5 × 0.8 |
| Taper Pipe Female Thread | Rc1/8, Rc1/4, Rc3/8, Rc1/2 |
Compatible sizes (thread sizes)
High performance and high quality
The lock claw evenly grips the circumference of the tube. Even after many years, tubes still attach and detach like new. Unique elastic sleeve design shuts out air leaks.
Industry-leading range of variations
A wide assortment of different-diameter sizes is available. One fitting can be used where traditionally two fittings were required. By reducing the number of fittings used, you can reduce costs and space. After installation, you can change the take-off angle of the resin body.
Allows centralized piping
The triple types (PKD, PKG, PKJ) and twin triple types (PKVD, PKVG) enable compact, centralized piping.
We offer a clean room packaging specification (optional), which is suited to piping in a clean environment
The product uses fluorochemical grease and is cleaned with clean air before being packaged in a clean room (equivalent to ISO Class 6). We offer a clean washing specification suitable for various particle- and oil-averse production processes (optional setting for clean room packaging specification).
The product is vacuum sealed after ultrasonic vacuum cleaning with HFE (hydrofluoroether) in a clean room.
| Part Number |
|---|
| PG1/4-4 |
| PG6-4 |
| PG6-4C |
| PG6-4W |
| PG8-6 |
| PG8-6C |
| PG8-6W |
| PG10-6 |
| PG10-8 |
| PG12-10 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Application | Applicable Tube O.D.1 (φ) | Applicable Tube Outer Diameter 2 (φ) | Package Specifications | Release Ring Color | Resin Body Color |
|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 19.74 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 6.35 | 4 | Regular Packaging Specifications | White | Black | ||
MYR 16.60 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 6 | 4 | Regular Packaging Specifications | Black | Black | ||
MYR 23.82 | 10 Piece(s) | 1 Day(s) | - | Standard/Mini / Clean circumstance | 6 | 4 | Clean Room Packaging Specifications | Light blue | Light Gray | ||
MYR 16.89 | 10 Piece(s) | 1 Day(s) | - | Standard/Mini | 6 | 4 | Regular Packaging Specifications | Light Gray | Light Gray | ||
MYR 17.88 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 8 | 6 | Regular Packaging Specifications | Black | Black | ||
MYR 26.75 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini / Clean circumstance | 8 | 6 | Clean Room Packaging Specifications | Light blue | Light Gray | ||
MYR 26.80 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 8 | 6 | Regular Packaging Specifications | Light Gray | Light Gray | ||
MYR 22.17 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 10 | 6 | Regular Packaging Specifications | Black | Black | ||
MYR 22.34 | 1 Piece(s) | 1 Day(s) | - | Standard/Mini | 10 | 8 | Regular Packaging Specifications | Black | Black | ||
MYR 23.74 | 1 Piece(s) | 1 Day(s) | 10 | Standard/Mini | 12 | 10 | Regular Packaging Specifications | Black | Black |
Loading...
Basic Information
| Types | One-Touch Couplings | Fitting Type | Union with different diameters | Applicable Fluid | Water / Air |
|---|---|---|---|---|---|
| Union, Unequal Dia. | Different Diameter Union Straight | Operating Temperature(°C) | 0::60 |
Specification/Dimensions
-
Application
- Standard/Mini
- Clean circumstance
-
Applicable Tube O.D.1(φ)
-
Applicable Tube Outer Diameter 2(φ)
-
Package Specifications
- Clean Room Packaging Specifications
- Regular Packaging Specifications
-
Release Ring Color
- Black
- Light Gray
- Light blue
- White
-
Resin Body Color
- Black
- Light Gray
-
type
- PG
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- One-Touch Couplings - Stepped Diameter Union Straight
- One-Touch Couplings - L-Connectors
- for General Piping, Tube Fitting Branch Triple
- One-Touch Fitting KQ2 Series Female Connector KQ2F
- Cross KQ2TW One-Touch Fitting KQ2 Series
- Plug-In Reducer KQ2R One-Touch Fitting KQ2 Series
- One-Touch Fitting KQ2 Series Male Elbow KQ2L (Gasket Seal)
- Male Connector KSH (Standard Type) Rotary One-Touch Fitting
Customers Who Viewed This Item Also Viewed
-
One-Touch Couplings - Stepped Diameter Union StraightMISUMI_Test
Standard Price : MYR 8.95-
Days to Ship : 1 Day(s) or more
-
Tube Fitting for General Piping - Straight
PISCO
Standard Price : MYR 9.95-
Days to Ship : 1 Day(s) or more
-
Tube Fitting Union Straight for Standard PipePISCO
Standard Price : MYR 16.64-
Days to Ship : 1 Day(s)
-
Tube Fitting Union T for Standard PipePISCO
Standard Price : MYR 19.77-
Days to Ship : 1 Day(s) or more
-
General Piping Use Tube Fitting, ElbowPISCO
Standard Price : MYR 13.92-
Days to Ship : 1 Day(s) or more
-
-
General Piping Straight PolyurethanePISCO
Standard Price : MYR 41.67-
Days to Ship : 1 Day(s) or more
-
-
Tube Fitting Different Diameter Union T for Standard PipePISCO
Standard Price : MYR 19.41-
Days to Ship : 1 Day(s)
-
Tube Fitting for General Piping - Mini Type with Different Diameters Union StraightPISCO
Standard Price : MYR 23.93-
Days to Ship : 1 Day(s)
-
Shut-off Valve, Hand Valve, Union StraightPISCO
Standard Price : MYR 51.07-
Days to Ship : 1 Day(s) or more
-
One-Touch Couplings - Union StraightMISUMI_Test
Standard Price : MYR 7.26-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7960 8499 / FAX：(60) 3 7960 7499
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy