(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
50,000 Stock items for Same Day Ship Out.
All Categories
Categories
- Automation Components
A wide variety of standard and configurable components for factory automation engineers in industries such as automotive, semiconductor, packaging, medical and many more.
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Discharging / Painting Devices
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Framing & Support
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjusting, Fastening, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
A good selection of accessories such as screws, bolts, washers and nuts that you may need for your daily engineering usage.
- Materials
Browse industrial materials ranging from heat insulating plates, sponges, to metal and plastic materials in different sizes to meet your various applications.
- Wiring Components
A wide variety of wiring parts for connecting and protecting control and PC parts including Connectors, Cables, Electric Wires, Crimping Terminals and more.
- LAN Cables / Industrial Network Cables
- Cables by Application
- Cables with Connectors
- RS232 / Personal Computers / AV Cables
- Wires/Cables
- Connectors (General Purpose)
- Crimp Terminals
- Zip Ties
- Cable Glands
- Cable Bushings/Clips/Stickers
- Screws/Spacers
- Cable Accessories
- Tubes
- Protection Tubes
- Ducts/Wiremolds
- General Purpose Tools
- Dedicated Tools
- Soldering Supplies
- Electrical & Controls
A wide variety of controls and PC parts for electrical engineers including Controls, Powers, PC parts and more.
- Cutting Tools
A wide variety of cutting tools for many uses and work materials including End Mills, Drills, Cutters, Reamers, Turning Tools and more.
- Carbide End Mills
- HSS End Mills
- Milling Cutter Inserts/Holders
- Customized Straight Blade End Mills
- Dedicated Cutters
- Turning Tools
- Drill Bits
- Screw-Hole-Related Tools
- Reamers
- Chamfering / Centering Tools
- Fixtures Related to Cutting Tools
- Step Drills
- Hole Saws
- Core Drills (Tip Tools)
- Drill Bits for Electric Drilling Machines
- Woodworking Drill Cutters
- Drills for Concrete
- Processing Tools
A wide variety of tools and supplies used in processing including Machine Tools, Measurement Tools, Grinding and Polishing Supplies and more.
- Material Handling & Storage
A wide variety of goods used in shipment, material handling and warehouse including Tape supplies, Stretch film, Truck, Shelf, Crane and more.
- Tape Supplies
- Cushioning Materials
- Stretch Films
- Plastic Bags
- PP Bands
- Magic Tapes / Tying Belts
- Rubber Bands
- Strings/Ropes
- Cable Ties
- Unpacking Cutters
- Packing Support Equipment
- Conveyance/Dolly Carts
- Tool Wagons
- Tool Cabinets / Container Racks
- Lifters / Hand Pallets
- Container Pallets
- Storage Supplies
- Shelves/Racks
- Work Benches
- Suspended Clamps/Suspended Belts
- Jack Winches
- Chain Block Cranes
- Bottles/Containers
- Safety & General Supplies
A large variety of goods for every kind of factories and offices including Protection items, Cleaning supplies, sanitations, office supplies and more.
- Lab & Clean Room Supplies
A large variety of items used in R&D and Clean Room including research Equipment, Laboratory Essentials, Analysis Supplies, Clean Environment-Related Equipment and more.
- Press Die Components
Choose from thousands of standard stamping die components including Punch & Die, Gas Springs, Guide Components, Coil Springs and many more.
- Plastic Mold Components
Browse our wide variety of mold components including Ejector Pins, Sleeves, Leader Components, Sprue Bushings and many more.
- Injection Molding Components
Browse our injection molding components including Heating Items, Couplers, Hoses and more.
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Compornents
- Parallel Air Chuck
- Special Air Chuck
- Chemical for Injection Molding
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Search by Application
Brands
- Please note that E-Invoice will be sent to our customers by email. For more information, please read News.
THK Linear Bushings
-
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications.
Part of the milli series, the most widely used series in Japan.Standard Price: MYR 17.08- Days to Ship: 1 Day(s) or more -
THK
The flange and outer cylinder are integrated and the flange is oval-shaped. This gives a lower core height, making this type more suitable for compact designs than the LMK type.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.Standard Price: MYR 46.46- Days to Ship: 2 Day(s) or more -
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and fitting is easily achieved by bolting directly to the housing.
Standard Price: MYR 41.43- Days to Ship: 2 Day(s) or more -
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
Standard Price: MYR 50.06- Days to Ship: 2 Day(s) or more -
THK
Flange is oval-shaped. More suitable than the LMK-L type for compact designs due to lower core height.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.
To lengthen the product life, the balls of the linear bushing are embedded in two races to support the load from the flats.Standard Price: MYR 102.83- Days to Ship: 2 Day(s) or more -
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.Standard Price: MYR 96.93- Days to Ship: 1 Day(s) or more -
THK
Type with LMF-L type flange having flats at 4 locations. Due to a lower core height, this type is more suitable for compact designs than the round flange type.
Standard Price: MYR 108.88- Days to Ship: 2 Day(s) or more -
Linear bushing LM-MG type (Stainless Steel)
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. Part of the milli series, the most widely used series in Japan.
Standard Price: MYR 32.80- Days to Ship: 1 Day(s) or more -
THK
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads and reduces assembly time.
Standard Price: MYR 41.86- Days to Ship: 1 Day(s) or more -
THK
Case unit has standard-type linear bushing embedded in small lightweight aluminum case. Can be mounted by simply bolting to table.
Standard Price: MYR 49.88- Days to Ship: 2 Day(s) or more -
Linear bush LMC-L shape (center flange type)
THK
[Features]
· Linear bushing of center flange type.
· Available in 3 types, round, rectangular and round chamfered. Each of these is also available as a long type.Standard Price: MYR 90.36- Days to Ship: 4 Day(s) or more -
Linear bushing LM-GA type (metal retainer type)
THK
[Features]
· Standard type. Equivalent to LM type of widely used milli size series, but including metal retainer.Standard Price: MYR 24.57- Days to Ship: 3 Day(s) or more -
THK
This linear bushing has an outer diameter formed by a highest-precision cylinder, and is used in a wide range of applications. It is part of the milli size series, which is in general use in Europe.
Standard Price: MYR 23.73- Days to Ship: 3 Day(s) or more -
Linear Bushing - LMK-ML Type (Stainless Steel Type)
THK
Type with LMF-L type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
Standard Price: MYR 209.25- Days to Ship: 3 Day(s) or more -
LM Stroke Bushing (Straight/Without Seal), ST Type, ST-B Type
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· In the ST type, the balls and ball cage are embedded in the inner side the of outer cylinder, which has been precision ground to ensure a cylindrical form
· The balls are arranged in a staggered form to that the load is equally distributed
· The ball cage is a machined cage made out of lightweight and highly rigid light alloy.
· A slide ring and retainer ring are provided on two sides of the internal diameter of the outer cylinder to prevent overrun of the ball cage.
· With this structure, it is possible to achieve rotating, linear and mixed action with a low friction coefficient.
· Stroke length can be up to double the range of movement of the ball cage within the outer cylinder
· Suitable for a wide range of applications where it is necessary to obtain high accuracy at a low price, including the ink roll parts of a printing machine, the work chuck of a punching press work, press feeders, the work head of an electric discharge machine, the correction device of a take-up roll, textile machines, strain measuring equipment, optical measuring device spindle, copiers, etc.
· Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.Standard Price: MYR 49.50- Days to Ship: 2 Day(s) or more -
Linear bushing LMI, LMI-L shape (spigot joint flange type)
THK
[Features]
· Pilot flange type linear bushing.
· Available in 3 types, round, rectangular and round with chamfering. Each of these is also available as a long type.Standard Price: MYR 49.43- Days to Ship: 2 Day(s) or more -
THK
SC long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
Standard Price: MYR 126.34- Days to Ship: 2 Day(s) or more -
THK
The nut and shaft are sold separately. Use together with THK shaft and bushings (LG, LG-S). Shaft end is unprocessed.
[Features]
· Due to the provision of 4 circular arc grooves (rolling grooves), the LG type does not required a rotation stopper mechanism in the outer cylinder.
· Also, compared with the linear bushing LM type of the same size, the rated load is substantially higher.
· Hence, by replacing the linear bushing with a guide ball bushing, a more compact form, lower cost and longer life can be achieved.
· When compared to a linear bushing, the rated load of the UP: LG type, which has an R contact due to the use of a circular arc contact structure, is equivalent to the point-contact linear bushing LMStandard Price: MYR 209.56 Days to Ship: 8 Day(s) or more -
Linear Bushing LMK-M (Stainless Steel Type)
THK
Type with LMF type flange having flats at 4 locations. Can be used in compact designs since the core height is lower than with the round flange type.
Standard Price: MYR 132.39- Days to Ship: 2 Day(s) or more -
LM stroke bushing (straight/with seal) ST-UU type and ST-UUB type
THK
Hardened shaft, recommended for use with outer diameter tolerance (k5, m5, n5 or p5).
[Features]
· [Extremely low friction coefficient] Enables rotation with extremely low friction coefficient (=0.0006 to 0.0012) due to point contacts between the balls and ball rolling surface, and the separation of the balls within the ball cage.
· [Compact-design] Since the cross-sectional profile is simply the combination of the thin-walled outer cylinder and the balls, the outer diameter of this bearing is small and it is suitable for lightweight and space-saving compact designs.
· [High accuracy and low price] The sliding parts can be manufactured at low cost and a high level of accuracy is obtained.Standard Price: MYR 59.02- Days to Ship: 2 Day(s) or more -
THK
Case unit is based on LM case unit SC-type with standard linear bushing embedded in small lightweight aluminum case. Compared to the SC type, this type is more suited for compact designs. Any mounting direction is acceptable and lifetime performance is enhanced due to 2 races of load-bearing balls on the case upper face.
Standard Price: MYR 85.40- Days to Ship: 2 Day(s) or more -
Linear BushingLMF-ML Type (Stainless Steel Type)
THK
The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.
With 2 standard retainers embedded, this product is optimal for sites subject to moment loads.Standard Price: MYR 175.09- Days to Ship: 3 Day(s) or more -
Linear bush LMF-M shape (stainless steel type)
THK
[Features]
· The outer cylinder of the standard-type linear bushing and the flange are integrated and mounting is easily achieved by bolting directly to the housing.Standard Price: MYR 96.93- Days to Ship: 2 Day(s) or more -
Linear bushing LMJK, LMJK-L shape (light flange type)
THK
[Features]
· Uses high-strength reinforced plastic in flange portion to achieve a reduction in weight compared with the conventional metal flange type (maximum 25%)
· Contributes to weight reduction when mounted to movable parts.
· Reasonable price realized by replacing the metal of the reasonably priced flange with high-strength plastic.Standard Price: MYR 95.34 Days to Ship: 2 Day(s) or more -
THK
SH long type. The case unit has 2 standard type linear bushings embedded in an aluminum case.
Standard Price: MYR 134.94- Days to Ship: 2 Day(s) or more -
THK
Optimal if enhanced dust-proofing is required, or if the seal resistance is to be reduced.
Standard Price: MYR 6.98- Days to Ship: 2 Day(s) or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Type |
| Style |
| Flange Type |
| Inscribed Circle Dia. dr(Ø) |
| Overall Length L(mm) |
| Outer Cylinder Material |
| Outer Cylinder Surface Treatment |
| Motion |
| Lubrication Type |
| Ball Recirculating Type |
| Outer Dia. D(Ø) |
| Accuracy |
| Eccentricity(µm) |
| Types |
| Length |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK | THK |
| Product Series | LM Stroke Bushing (Straight/Without Seal), ST Type, ST-B Type | LM stroke bushing (straight/with seal) ST-UU type and ST-UUB type | ||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
| Days to Ship | 1 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 1 Day(s) or more | 1 Day(s) or more | 2 Day(s) or more | 4 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 8 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 3 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more | 2 Day(s) or more |
| Type | Straight | Flange | Flange | Flange | Flange | Flange | Flange | Straight | Straight | - | - | Straight | Straight | Flange | Straight | - | - | Straight | - | Straight | - | - | - | - | - | - |
| Style | 00008 / Standard / Open Type, Clearance Adjusting Type | - | - | - | - | - | - | - | - | Standard | Standard | - | - | Standard | - | Standard | Standard | Standard | - | - | Standard | - | - | - | Standard | Standard / Open Type, Clearance Adjusting Type |
| Flange Type | - | Standard Flange | - | Standard Flange | Standard Flange | - | Standard Flange | - | - | - | Center Flanged | - | - | Standard Flange | - | Pilot Flanged | - | - | Standard Flange | - | - | Standard Flange | Standard Flange | Standard Flange | - | - |
| Inscribed Circle Dia. dr(Ø) | 3 ～ 60 | 6 ～ 30 | 6 ～ 60 | 6 ～ 60 | 6 ～ 30 | 6 ～ 60 | 6 ～ 60 | 3 ～ 40 | 3 ～ 60 | 6 ～ 50 | 6 ～ 25 | 6 ～ 120 | 5 ～ 80 | 6 ～ 30 | 6 ～ 100 | 6 ～ 25 | 6 ～ 30 | - | 6 ～ 30 | 8 ～ 100 | 3 ～ 20 | 6 ～ 30 | 6 ～ 30 | 8 | 3 ～ 20 | - |
| Overall Length L(mm) | 10 ～ 110 | 19 ～ 64 | 17 ～ 110 | 17 ～ 110 | 35 ～ 123 | 35 ～ 211 | 35 ～ 211 | 10 ～ 80 | 19 ～ 211 | 25 ～ 110 | 35 ～ 112 | 17 ～ 200 | 22 ～ 165 | 35 ～ 123 | 19 ～ 100 | 19 ～ 80 | 48 ～ 140 | - | 17 ～ 64 | 24 ～ 100 | 13 ～ 44 | 35 ～ 123 | 17 ～ 64 | 45 | 23 ～ 86 | - |
| Outer Cylinder Material | Steel | Steel | Steel | Steel | Steel | Steel | Steel | Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel | Steel | Steel | Steel | Steel | - | Steel | Steel / Stainless Steel | - | Stainless Steel | - | Steel / Stainless Steel | Stainless Steel | Stainless Steel | Steel | Steel / Stainless Steel | - |
| Outer Cylinder Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | - | No Surface Treatment | No Surface Treatment | - | No Surface Treatment | - | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | No Surface Treatment | - |
| Motion | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear | Linear/Rotary | Linear | Linear | Linear | Linear | Linear/Rotary | Linear | Linear | Linear | Linear | Linear | - |
| Lubrication Type | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - | Not Provided | Not Provided | - | Not Provided | - | Not Provided | Not Provided | Not Provided | Not Provided | Not Provided | - |
| Ball Recirculating Type | Single | Single | Single | Single | Double | Double | Double | Single | Double | Single | Double | Single | Single | Double | - | Single / Double | Double | - | Single | - | Single | Double | Single | Double | Double | - |
| Outer Dia. D(Ø) | 7 ～ 90 | 12 ～ 45 | 12 ～ 90 | 12 ～ 90 | 12 ～ 45 | 12 ～ 90 | 12 ～ 90 | 7 ～ 60 | 7 ～ 90 | - | 12 ～ 40 | 12 ～ 180 | 12 ～ 120 | 12 ～ 45 | 12 ～ 130 | 12 ～ 40 | - | - | 12 ～ 45 | 15 ～ 130 | - | 12 ～ 45 | 12 ～ 45 | 15 | - | - |
| Accuracy | High Grade / Precision Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade | High Grade / Precision Grade | High Grade / Precision Grade | High Grade | - | High Grade / Precision Grade | High Grade | High Grade | - | - | High Grade | - | High Grade | - | High Grade | High Grade | High Grade | - | High Grade | - |
| Eccentricity(µm) | 4 ～ 25 | 12 ～ 15 | 12 ～ 25 | 12 ～ 25 | 15 ～ 20 | 15 ～ 25 | 15 ～ 25 | 8 ～ 20 | 10 ～ 25 | - | 12 ～ 15 | 8 ～ 30 | 12 ～ 20 | 15 ～ 20 | - | 12 ～ 20 | - | - | 12 ～ 15 | - | - | 15 ～ 20 | 12 ～ 15 | 15 | - | - |
| Types | Standard / Open / Clearance Adjustment Type | Flanged End | Flanged End | Flanged End | Flanged End | Flanged End | Flanged End | Standard / Open / Clearance Adjustment Type | Standard | Linear Bushing Housing Unit - Wide Blocks | Center with Flange | Standard / Open / Clearance Adjustment Type | Standard / Open / Clearance Adjustment Type | Flanged End | Standard | Pilot with Flange | Linear Bushing Housing Unit - Wide Blocks | Related Components | Flanged End | Standard | Housing Type | Flanged End | Flanged End | Flanged End | Housing Type | Related Components |
| Length | Standard | Standard | Standard | Standard | Long | Long | Long | Standard | Long | Standard | Long | Standard | Standard | Long | - | Short / Long | Long | - | Standard | - | Standard | Long | Standard | Long | Long | - |
Loading...
Configure
Specification/Dimensions
-
Style
-
Flange Type
-
Inscribed Circle Dia. dr(Ø)
-
Overall Length L(mm)
- 10
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 19.050 (3/4")
- 20
- 22
- 22.225 (7/8")
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 31.750 (1-1/4")
- 32
- 34
- 35
- 36
- 37
- 38
- 38.100 (1-1/2")
- 39
- 40
- 41
- 41.275 (1-5/8")
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 57.150 (2-1/4")
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 66.675 (2-5/8")
- 67
- 67.5
- 68
- 69
- 70
- 72
- 73
- 74
- 75
- 76
- 76.200 (3")
- 78
- 79
- 80
- 82
- 83
- 84
- 85
- 86
- 88
- 90
- 91
- 93
- 94
- 96
- 98
- 100
- 101.600 (4")
- 103
- 105
- 108
- 109
- 110
- 112
- 114
- 118
- 120
- 122
- 123
- 124
- 125
- 127.000 (5")
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 138
- 140
- 141
- 144
- 145
- 150
- 151
- 152.400 (6")
- 153
- 154
- 155
- 156
- 158
- 165
- 170
- 175
- 176
- 178
- 182
- 184
- 187
- 190
- 192
- 193
- 200
- 203.200 (8")
- 209
- 211
- 215
- 220
- 224
- 240
- 244
- 250
- 300
- 310
-
Outer Cylinder Material
- Steel
- Stainless Steel
- Aluminum
-
Outer Cylinder Surface Treatment
- No Surface Treatment
- Surface Treatment
-
Motion
-
Lubrication Type
- Not Provided
- Lubrication Applied
- Lubrication Impregnated
-
Ball Recirculating Type
-
Outer Dia. D(Ø)
-
Accuracy
-
Eccentricity(µm)
-
Types
-
Length
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
- 10 Day(s) or Less
- 11 Day(s) or Less
Related Categories to Linear Bushings
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy